New Page 1
Built with the same
rigid standard that has made RENS metal detectors one of the most durable
and reliable units in the field today. Backed by more than 50 years of
experience, design and service.
RENS model P-4000
is a fully automated unit. No manual adjustments are required. Simply turn on
and let it work as hard as you do. Runs ten hours on a full charge. Regulated
power prevents loss of sensitivity as battery charge is depleted.
This unit is designed
to be used in an industrial environment without needing a lot of operator skill.
Protective Case & Chassis
Weight: Approx. 7 1/2 lbs.
Length: 51 1/2" - 57" adjustable
Power Supply: 17.5 volt
Solid State Circuitry
Adjustable Sound Level (0-100db)
Includes: earphone, shoulder strap, battery pack, re-charger & Poly-form
of scanning logs
will insure that the entire surface of the log is scanned by the metal detector.
NOTE: The surface
(ground, deck, concrete floor) must be free of metal in order not to interfere
with electromagnetic field of the search head.
search head close to the log surface and scan the entire length of the log as
shown in diagram above.
2. Move to
other side of the log and repeat step 1.
3. Roll log
over as required to expose unscanned surfaces. Scan the rest of the
circumference of the log covering the complete surface of the log. Overlap
longitudinal sweeps to prevent dead spots.